PRODUCT
Stainless steel plates can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc
Stainless steel coils can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc.
Stainless steel pipes are important products in the steel industry and can be widely used in daily decoration and industrial fields. Many people in the market use it to make staircase handrails, window balustrades, railings.
Stainless steel rods can be divided into round steel, square steel, flat steel, hexagonal steel, and octagonal steel according to their shape. Common materials: 304, 304L, 321, 316, 316L, 310S, 630, etc.
Carbon steel plate mainly refers to steel with a carbon mass fraction less than 2.11% and without special added alloy elements. Commonly used materials include A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.
Carbon steel coil mainly refers to steel with a carbon mass fraction less than 2.11% and without special added alloying elements. Commonly used materials include A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.
Carbon steel pipes are made from perforated steel ingots or solid round steel, and then hot rolled, cold rolled, or cold drawn. Commonly used materials include A53/A106/API Spec 5L/A179/A213//A335/SSAW etc.
Carbon steel round steel is a steel with a carbon content greater than 0.08%, and is one of the most widely used materials in the construction industry. Commonly used materials include A36/S355JR/1018/1025/4130/EN8 etc.
Steel bars are steel used for reinforced concrete and prestressed reinforced concrete, with a circular cross-section and sometimes a square shape with rounded corners.
Ordinary quality steel wire includes welding rods, nail making, mesh making, packaging and printing industry steel wire, cold heading rivets and screws for cold heading forging steel wire, etc.
Color coated board is made from metal sheets as the substrate, coated or laminated with various organic coatings or plastic films on the surface, and can be divided into PPGI and PPGL.
Color coated rolls are lightweight, aesthetically pleasing, and have good corrosion resistance. They can also be directly processed and are generally classified into gray white, navy blue, brick red, and other colors.
Galvanized steel plate is coated with a layer of metal zinc to prevent corrosion on the surface of the steel plate and extend its service life. It is divided into hot-dip galvanizing and electrogalvanizing.
Galvanized coil is made of hot-rolled or cold-rolled steel strip as the substrate, which is divided into hot-dip galvanizing and electrogalvanizing.
The coating composition of aluminum zinc plated plate is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc plated steel plate can prevent long-term rusting of the steel plate.
The coating composition of aluminum coated zinc coils is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc coated steel coils can prevent long-term rusting of the steel coils.
Aluminum plates are generally divided into pure aluminum plates, alloy aluminum plates, thin aluminum plates, medium thick aluminum plates, patterned aluminum plates, etc.
Aluminum coil is a metal product produced by a casting and rolling mill after rolling, bending, and angle machining for flying shear. Aluminum coils are widely used in automobiles, electrical appliances, etc.
Aluminum pipes include pure aluminum or aluminum alloy aluminum pipes, which can have one or more closed through-holes, uniform wall thickness and cross-sectional area, and are delivered in a straight or rolled shape.
Aluminum rods are made of aluminum alloys with different contents. There are commercial pure and alloy versions. Provide aluminum rods of various grades, types, and specifications.
Tinplate (commonly known as tinplate) refers to a steel plate with a thin layer of metal tin coated on its surface. Tinplate is a steel plate made of low-carbon steel rolled into a thickness of approximately 2mm.
Tinplate roll is a widely used metal material with a thin layer of tin covering its surface. This technology can make ordinary metal sheets have characteristics such as corrosion resistance and oxidation resistance.
Alloy plate is a manufacturing material made by mixing two or more metal elements. It is usually used to manufacture various products, including building materials, aerospace components, automotive parts, etc.
Alloy coil is a new type of metal material that is composed of a certain proportion of low alloy elements and ordinary steel.The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Alloy pipes can be divided into circular pipes, square pipes, rectangular pipes, hexagonal pipes, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Alloy rods can be divided into round rods, square rods, hexagonal rods, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Non oriented silicon steel is a silicon iron alloy with very low carbon content, and its grains exhibit irregular orientation distribution in the steel plate after deformation and annealing.
Oriented silicon steel, also known as cold-rolled transformer steel, is an important ferrosilicon alloy used in the transformer (iron core) manufacturing industry.
Copper plate has good conductivity, thermal conductivity, and plasticity. Therefore, it is widely used in various industries, such as building roofs, vehicle components, printed circuit boards, etc.
Copper coils are usually relatively thin copper sheets that can be cut into any length according to demand, and have good conductivity, thermal conductivity, and plasticity.
Copper pipes have good conductivity and thermal conductivity, strong corrosion resistance, are not easy to oxidize, and are not prone to chemical reactions with some liquid substances, making them easy to bend and shape.
The surface of the copper rod forms an oxide film and turns rosy red and purple. Good mechanical properties, good hot plasticity, acceptable cold plasticity, good machinability, and corrosion resistance.
Martensitic (M) steel has very high yield strength (Re) and extremely high tensile strength (Rm). Docol ® Martensitic steel has good deep drawing properties and good edge tensile properties.
Hot formed steel, the forming process determines the final characteristics of the material. High temperature forming is beneficial for complex structures, as martensitic microstructures are formed after compression hardening.
Multiphase steel has higher yield strength and lower work hardening effect. These steels are suitable for applications that require high strength, good bending properties, and tensile flange capabilities.
High edge ductility steel for automobiles, Docol ® HE is a series of new hot rolled advanced high-strength steel with improved edge ductility, suitable for automotive manufacturers facing production technology challenges.
Dual phase steel has good formability relative to strength, but its expansion ability is limited. It has good weldability but is sensitive to heat treatment.
The difference between yield strength and tensile strength of high-strength low alloy (HSLA) steel is usually small, as they have excellent bending performance and better precision punching performance.
H-beam steel is widely used in industrial and civil steel structures, such as beams, load-bearing brackets for industrial structures, and supports for ships, trains, automobiles, conveyor belts, and highway fenders.
I-beams can not only be processed through cutting, welding, and other methods, but also be applied in various fields of architecture and structure.
Channel steel is a long strip steel with a groove shaped cross-section, belonging to the carbon structural steel used for construction and machinery. It is a complex section steel with a groove shaped cross-section.
Angle steel is mainly divided into two types: equilateral angle steel and unequal angle steel, which are widely used in various building and engineering structures, such as beams, bridges, ships, industrial furnaces, etc.
Fasteners are a type of mechanical components that are widely used for fastening connections. The characteristic is a wide variety of specifications, with different performance and uses.
Manufacturing Process
Production Lines and Equipments
Third Party Inspection Reports
Mill Test Certificates
Inspection Process
Warehouse Inventory
Packaging Details
Product Knowledge
JIANCHENG NEWS
Shipping News
THEY TRUST US
About Jiancheng
Message from the GM
Organization Structure
Why Choose Us
Steel Standards and Grades
No
China
Jepan
USA
Korea
Germany
India
Australia
China-Taiwan
GB
JIS
ASTM
UNS
KS
DIN
BIS
AS
CNS
1
12Cr17Mn6Ni5N
SUS201
201
S20100
STS201
1.4372
10Cr17Mn6Ni4N20
201-2
2
12Cr18Mn9Ni5N
SUS202
202
S20200
STS202
1.4373
-
3
12Cr17Ni7
SUS301
301
STS301
1.4319
10Cr17Ni7
4
06Cr19Ni10
SUS304
304
S30400
STS304
1.4301
07Cr18Ni9
5
022Cr19Ni10
SUS304L
304L
S30403
STS304L
1.4306
02Cr18Ni11
6
06Cr19Ni10N
SUS304N1
304N
S30451
STS304N1
1.4315
304N1
7
06Cr19Ni9NbN
SUS304N2
XM21
S30452
STS304N2
304N2
8
022Cr19Ni10N
SUS304LN
304LN
S30453
STS304LN
9
10Cr18Ni12
SUS305
305
S30500
STS305
1.4303
10
06Cr23Ni13
SUS309S
309S
S30908
STS309S
1.4833
11
06Cr25Ni20
SUS310S
310S
S31008
STS310S
1.4845
12
06Cr17Ni12Mo2
SUS316
316
S31600
STS316
1.4401
04Cr17Ni12Mo2
13
06Cr17Ni12Mo2Ti
SUS316Ti
316Ti
S31635
1.4571
04Cr17Ni12MoTi20
14
022Cr17Ni12Mo2
SUS316L
316L
S31603
STS316L
1.4404
~02Cr17Ni12Mo2
15
06Cr17Ni12Mo2N
SUS316N
316N
S31651
STS316N
16
022Cr17Ni13Mo2N
SUS316LN
316LN
S31653
STS316LN
1.4429
17
06Cr18Ni12Mo2Cu2
SUS316J1
STS316J1
316J1
18
022Cr18Ni14Mo2Cu2
SUS316J1L
STS316J1L
316J1L
19
06Cr19Ni13Mo3
SUS317
317
S31700
STS317
20
022Cr19Ni13Mo3
SUS317L
317L
S31703
STS317L
1.4438
21
06Cr18Ni11Ti S
SUS321
321
S32100
STS321
1.4541
04Cr18Ni10Ti20
22
06Cr18Ni11Nb
SUS347
347
S34700
STS347
1.4550
04Cr18Ni10Nb40
SUS329J1
329
S32900
STS329J1
1.4477
329J1
022Cr23Ni5Mo3N
S32205
F60
1.4462
2205
022Cr25Ni7Mo4N
S32750
F53
1.4410
2507
06Crl3Al
SUS405
405
S40500
STS405
1.4002
04Cr13
022Cr11Ti
SUH409
409
S40900
STS409
1.4512
409L
022Cr12
SUS410L
STS410L
410L
10Cr17
SUS430
430
S43000
STS430
1.4016
05Cr17
10Cr17Mo
SUS434
434
S43400
STS434
1.4113
022Cr18NbTi
S43940
1.4509
439
019Cr19Mo2NbTi
SUS444
444
S44400
STS444
1.4521
12Cr12
SUS403
403
S40300
STS403
12Cr13
SUS410
410
S41000
STS410
1.4006
20Cr13
SUS420J1
S42000
STS420J1
1.4021
420
420J1
30Cr13
SUS420J2
STS420J2
1.4028
30 Cr13
420J2
68Cr17
SUS440A
440A
S44002
STS440A
HAVE ANY QUESTION?
WhatsApp
Stainless Steel
Carbon Steel
Zinc/Aluzinc/Color Coated Steel
Aluminum
Tinplate Steel
Alloy
Silicon Steel
Copper
Automotive Steel
Profile
Accessories
Catalogue
FAQ
MANUFACTURING
Manufacturing Video
Plate & Coil
Steel Pipe
Steel Bar
Galvanized
Forging Steel
PROJECTS
NEWS
Company News
Industry News
Exhibitions Info
ABOUT US
English
Русский язык
Español
العربية
にほんご
한국어
Deutsch
Français
Português
ไทย
Việt
Nederlands
Ελληνικά
svenska
magyar
čeština
suomi
dansk
język polski
Italiano
Consulting Bulk Order Discounts
Jiancheng Steel is committed to providing the most reliable and satisfactory steel and metal product solutions to global users.