PRODUCT
Stainless steel plates can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc
Stainless steel coils can be divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, duplex stainless steel, etc. The most common ones are 201, 201L, 301, 304, 304L, 316, 316L, 409 etc.
Stainless steel pipes are important products in the steel industry and can be widely used in daily decoration and industrial fields. Many people in the market use it to make staircase handrails, window balustrades, railings.
Stainless steel rods can be divided into round steel, square steel, flat steel, hexagonal steel, and octagonal steel according to their shape. Common materials: 304, 304L, 321, 316, 316L, 310S, 630, etc.
Carbon steel plate mainly refers to steel with a carbon mass fraction less than 2.11% and without special added alloy elements. Commonly used materials include A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.
Carbon steel coil mainly refers to steel with a carbon mass fraction less than 2.11% and without special added alloying elements. Commonly used materials include A36/S235JR/A283/A514/A572/S355JR/A709/A285/A387/A515 etc.
Carbon steel pipes are made from perforated steel ingots or solid round steel, and then hot rolled, cold rolled, or cold drawn. Commonly used materials include A53/A106/API Spec 5L/A179/A213//A335/SSAW etc.
Carbon steel round steel is a steel with a carbon content greater than 0.08%, and is one of the most widely used materials in the construction industry. Commonly used materials include A36/S355JR/1018/1025/4130/EN8 etc.
Steel bars are steel used for reinforced concrete and prestressed reinforced concrete, with a circular cross-section and sometimes a square shape with rounded corners.
Ordinary quality steel wire includes welding rods, nail making, mesh making, packaging and printing industry steel wire, cold heading rivets and screws for cold heading forging steel wire, etc.
Color coated board is made from metal sheets as the substrate, coated or laminated with various organic coatings or plastic films on the surface, and can be divided into PPGI and PPGL.
Color coated rolls are lightweight, aesthetically pleasing, and have good corrosion resistance. They can also be directly processed and are generally classified into gray white, navy blue, brick red, and other colors.
Galvanized steel plate is coated with a layer of metal zinc to prevent corrosion on the surface of the steel plate and extend its service life. It is divided into hot-dip galvanizing and electrogalvanizing.
Galvanized coil is made of hot-rolled or cold-rolled steel strip as the substrate, which is divided into hot-dip galvanizing and electrogalvanizing.
The coating composition of aluminum zinc plated plate is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc plated steel plate can prevent long-term rusting of the steel plate.
The coating composition of aluminum coated zinc coils is composed of 55% aluminum, 43.4% zinc, and 1.6% silicon in weight ratio, respectively. Aluminum zinc coated steel coils can prevent long-term rusting of the steel coils.
Aluminum plates are generally divided into pure aluminum plates, alloy aluminum plates, thin aluminum plates, medium thick aluminum plates, patterned aluminum plates, etc.
Aluminum coil is a metal product produced by a casting and rolling mill after rolling, bending, and angle machining for flying shear. Aluminum coils are widely used in automobiles, electrical appliances, etc.
Aluminum pipes include pure aluminum or aluminum alloy aluminum pipes, which can have one or more closed through-holes, uniform wall thickness and cross-sectional area, and are delivered in a straight or rolled shape.
Aluminum rods are made of aluminum alloys with different contents. There are commercial pure and alloy versions. Provide aluminum rods of various grades, types, and specifications.
Tinplate (commonly known as tinplate) refers to a steel plate with a thin layer of metal tin coated on its surface. Tinplate is a steel plate made of low-carbon steel rolled into a thickness of approximately 2mm.
Tinplate roll is a widely used metal material with a thin layer of tin covering its surface. This technology can make ordinary metal sheets have characteristics such as corrosion resistance and oxidation resistance.
Alloy plate is a manufacturing material made by mixing two or more metal elements. It is usually used to manufacture various products, including building materials, aerospace components, automotive parts, etc.
Alloy coil is a new type of metal material that is composed of a certain proportion of low alloy elements and ordinary steel.The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Alloy pipes can be divided into circular pipes, square pipes, rectangular pipes, hexagonal pipes, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Alloy rods can be divided into round rods, square rods, hexagonal rods, etc. according to their shape. The main materials are: Hastelloy, Monel, nickel alloy, titanium alloy, Inconel, Incoloy, etc.
Non oriented silicon steel is a silicon iron alloy with very low carbon content, and its grains exhibit irregular orientation distribution in the steel plate after deformation and annealing.
Oriented silicon steel, also known as cold-rolled transformer steel, is an important ferrosilicon alloy used in the transformer (iron core) manufacturing industry.
Copper plate has good conductivity, thermal conductivity, and plasticity. Therefore, it is widely used in various industries, such as building roofs, vehicle components, printed circuit boards, etc.
Copper coils are usually relatively thin copper sheets that can be cut into any length according to demand, and have good conductivity, thermal conductivity, and plasticity.
Copper pipes have good conductivity and thermal conductivity, strong corrosion resistance, are not easy to oxidize, and are not prone to chemical reactions with some liquid substances, making them easy to bend and shape.
The surface of the copper rod forms an oxide film and turns rosy red and purple. Good mechanical properties, good hot plasticity, acceptable cold plasticity, good machinability, and corrosion resistance.
Martensitic (M) steel has very high yield strength (Re) and extremely high tensile strength (Rm). Docol ® Martensitic steel has good deep drawing properties and good edge tensile properties.
Hot formed steel, the forming process determines the final characteristics of the material. High temperature forming is beneficial for complex structures, as martensitic microstructures are formed after compression hardening.
Multiphase steel has higher yield strength and lower work hardening effect. These steels are suitable for applications that require high strength, good bending properties, and tensile flange capabilities.
High edge ductility steel for automobiles, Docol ® HE is a series of new hot rolled advanced high-strength steel with improved edge ductility, suitable for automotive manufacturers facing production technology challenges.
Dual phase steel has good formability relative to strength, but its expansion ability is limited. It has good weldability but is sensitive to heat treatment.
The difference between yield strength and tensile strength of high-strength low alloy (HSLA) steel is usually small, as they have excellent bending performance and better precision punching performance.
H-beam steel is widely used in industrial and civil steel structures, such as beams, load-bearing brackets for industrial structures, and supports for ships, trains, automobiles, conveyor belts, and highway fenders.
I-beams can not only be processed through cutting, welding, and other methods, but also be applied in various fields of architecture and structure.
Channel steel is a long strip steel with a groove shaped cross-section, belonging to the carbon structural steel used for construction and machinery. It is a complex section steel with a groove shaped cross-section.
Angle steel is mainly divided into two types: equilateral angle steel and unequal angle steel, which are widely used in various building and engineering structures, such as beams, bridges, ships, industrial furnaces, etc.
Fasteners are a type of mechanical components that are widely used for fastening connections. The characteristic is a wide variety of specifications, with different performance and uses.
Manufacturing Process
Production Lines and Equipments
Third Party Inspection Reports
Mill Test Certificates
Inspection Process
Warehouse Inventory
Packaging Details
Product Knowledge
JIANCHENG NEWS
Shipping News
THEY TRUST US
About Jiancheng
Message from the GM
Organization Structure
Why Choose Us
Steel Standards and Grades
GB
DIN
EN
ISO
UNS
JIS
TU2
OF-Cu
2.0040
Cu-OFE
CW009A
Cu-OF
C10100
C1011
-
SE-Cu
2.0070
Cu-HCP
CW021A
C10300
Cu-PHC
CW020A
T2
E-Cu58
2.0065
Cu-ETP
CW004A
C11000
C1100
TP2
SF-Cu
2.0090
Cu-DHP
CW024A
C12200
C1220
Cu-DLP
TPI
SW-Cu
2.0076
CW023A
C12000
C1201
H96
CuZn5
2.0220
CE500L
C21000
C2100
H90
CuZn10
2.0230
CW501L
C22000
C2200
H85
CuZn15
2.0240
CW502L
C23000
C2300
H80
CuZn20
2.0250
CW503L
C24000
C2400
H70
CuZn30
2.0265
CW505L
C26000
C2600
H68
CuZn33
2.0280
CW506L
CuZn35
C26800
C2680
H65
CuZn36
2.0335
CW507L
C27000
C2700
H63
CuZn37
2.0321
CW508L
C27200
C2720
HPb63-3
CuZn36Pb1.5
2.0331
CuZn35Pb1
CW600N
C34000
C3501
CuZn35Pb2
CW601N
CuZn34Pb2
C34200
H62
CuZn40
2.0360
CW509N
C28000
C3712
H60
CuZn38Pb1.5
2.0371
CuZn38Pb2
CW608N
CuZn37Pb2
C35000
CuZn36Pb3
2.0375
CW603N
C36000
C3601
HPb59-1
CuZn39Pb2
2.0380
CW612N
C37700
C3771
HPb58-2.5
CuZn39Pb3
2.0401
CW614N
C38500
C3603
CuZn40Pb2
2.0402
CW617N
C38000
CuZn28Sn1
2.0470
CuZn28SnlAs
CW706R
C68800
C4430
CuZn31Si1
2.0490
CuZn31Sil
CW708R
C44300
CuZn20Al2
2.0460
CuZn20Al2As
CW702R
C68700
C6870
QSn4-0.3
CuSn4
2.1016
CW450K
C51100
C5111
CuSn5
2.1018
CW451K
C51000
C5102
QSn6.5-0.1
CuSn6
2.1020
CW452K
C51900
C5191
QSn8-0.3
CuSn8
2.1030
CW453K
C52100
C5210
BZn12-24
CuNi12Zn24
2.0730
CW403J
C75700
BZn12-26
CuNi18Zn27
2.0742
CW410J
C77000
C7701
BZn18-18
CuNi18Zn20
2.0740
CW409J
C76400
C7521
CuNi10Fe1Mn
2.0872
CW352H
C70600
C7060
CuNi30MnlFe
2.8820
CuNi30Mn1Fe
CW354H
C71500
C7150
HAVE ANY QUESTION?
WhatsApp
Stainless Steel
Carbon Steel
Zinc/Aluzinc/Color Coated Steel
Aluminum
Tinplate Steel
Alloy
Silicon Steel
Copper
Automotive Steel
Profile
Accessories
Catalogue
FAQ
MANUFACTURING
Manufacturing Video
Plate & Coil
Steel Pipe
Steel Bar
Galvanized
Forging Steel
PROJECTS
NEWS
Company News
Industry News
Exhibitions Info
ABOUT US
English
Русский язык
Español
العربية
にほんご
한국어
Deutsch
Français
Português
ไทย
Việt
Nederlands
Ελληνικά
svenska
magyar
čeština
suomi
dansk
język polski
Italiano
Consulting Bulk Order Discounts
Jiancheng Steel is committed to providing the most reliable and satisfactory steel and metal product solutions to global users.